|
|
|
1. Wedeven, L.D. and Cameron, A., " A Study of Elastohydrodynamic Lubrication in Rolling Bearings Using Optical Interference," Proc. Inst. Mech. Engrs., Vol. 182, Part 3G, 1967-68, pp.87-89. 2. Wedeven, L.D. and Cameron, A. "The Observation of Elastohydrodynamic Lubrication in a Rolling Element Bearing Using Optical Interferometry," The Tenth Int'l. Symposium on Lubrication of Rolling Bearings, Halle, Germany, August 1968, pp. 27-31. 3. Foord, C.A., Wedeven, L.D., Westlake, F.J. and Cameron, A. "Optical Elastohydrodynamics," Proceedings Inst. Mech. Engrs., Vol. 184, Part I, 1969-1970. 4. Wedeven, L.D. "Optical Measurements in Elastohydrodynamic Rolling-Contact Bearings," Thesis for PhD., Imperial College, Univ. of London, 1970. 5. Wedeven, L.D., Evans, D. and Cameron, A. "Optical Analysis of Ball Bearing Starvation," ASME Trans., JOLT, Series F, Vol. 93, No. 3, and NASA TMX-52869, July 1971, pp. 349-363. 6. Wedeven, L.D., "Preliminary Study of the Use of Infrared Radiation to Reveal Lubrication Behavior," NASA TMX-67883, July 1971. 7. Jones, W.R. and Wedeven, L.D., "Surface-Tension Measurements in Air of Liquid Lubricants to 200 0C by the Differential-Maximum-Bubble-Pressure Technique," NASA TN D-6450, September 1971. 8. Wedeven, L.D., "Influence of Liquid Lubricant Properties on Their Performance," NASA TM X-68183. 9. Wedeven, L.D., "Traction and Film Thickness Measurements Under Starved Elastohydrodynamic Conditions, " ASME Trans., JOLT, Series F, Vol. 97, No. 2, and NASA TMX-71584, April 1975, pp. 321-329. 10. Wedeven, L.D., "What is EHD?," Lubrication Engineering,
Vol. 31, No. 6, June 1975, pp 11. Medrow, R.A., Johnson, R.L., Loomis, W.R. and Wedeven, L.D., "Analysis of a Heat Transfer Device for Measuring Film Coefficient," NASA TM X-71809, September 1975. 12. Wedeven, L.D. "Effect of Starvation on Film Thickness and Traction Under Elastohydrodynamic Rolling and Sliding Conditions," NASA TN D-8087, October 1975. 13. Wedeven, L.D. "Influence of Debris Dent on EHD Lubrication," ASLE Trans, Vol. 21, No. 2, and NASA TM X-73457 (1976), Jan. 1978, pp. 41-52. 14. Wedeven, L.D., "Diagnostics of Wear in Aeronautical Systems," NASA TM 79185, June 1979, Proc. National Symposium on Wear and Corrosion, June 4-6, 1979, Carnegie Inst., Washington, D.C., American Chemical Society, pp. 86-89. 15. Wedeven, L.D., and Cusano, C., "Elastohydrodynamic Film Thickness Measurements of Artificially Produced Surface Dents and Grooves," NASA TM 7849, ASLE Trans, Vol. 22, No. 4, 1979, pp. 369-381. 16. Cusano, C. and Wedeven, L.D., "Elastohydrodynamic Film Thickness Measurements on Artificially Produced Nonsmooth Surfaces," NASA TM 79214, ASLE Trans., Vol. 24, No. 1, 1981, pp. 1-14. 17. Wedeven, L.D., "Tribology - Government and University Connections," NASA TM 81527, June 1980. 18. Cusano, C. and Wedeven, L.D., "The Effect of Artifically-Produced Defects on the Film Thickness Distribution in Sliding EHD Point Contacts," NASA TM 82732, ASME JOLT, Vol. 104, July 1982, pp. 365-375. 19. Cusano, C. and Wedeven, L.D., "The Influence of Surface Dents and Grooves on Traction in Sliding EHD Point Contacts," NASA TM 82943, 1982, ASLE Trans, Vol 26, No. 3, July 1983, pp. 306-310. 20. Dyson, A. and Wedeven, L.D., "Assessment of Lubricated Contacts - Mechanisms of Scuffing and Scoring," NASA TM 83074, February 1983. 21. Wedeven, L.D. and Cusano, C., "Elastohydrodynamic Contacts - Effects of Dents and Grooves on Traction and Local Film Thickness," NASA TP 2175, June 1983. 22. Wedeven, L.D., "Requirement for Academic, Government and Industry Interaction of Load Capacity Technology, " Presented at the 38th MFPG Meeting, "Enhancing the Technology Base for Failure Avoidance and Durability Improvements," Nov. 29 - Dec. 1, 1983. 23. Pallini, R.A., Wedeven, L.D., Ragen, M.A. and Aggarwal, B.B., "Solid Lubrication Design Methodology, Phase II - Final Report, DOE/NASA/0323-2, NASA CR-175114, Feb., 1986. 24. Wedeven, L.D., Pallini, R.A. and Aggarwal, B.B., "Solid Lubrication Design Methodology - High Temperature, Ceramic Testing," Proceedings of the Twenty-Third Automotive Technology Development Contractor's Coordination Meeting, P-165, March 1986, pp. 99-116. 25. Wedeven, L.D. and Maurer, R.E., "Material Selection for Space Shuttle Fuel Pumps," Ball Bearing Journal, Vol. 226, April 1986, pp. 2-9. 26. Wedeven, L.D., Pallini, R.A. and Miller, N.C., "Tribological Examination of Unlubricated and Graphite Lubricated Silicon Nitride under Traction Stress," Wear of Materials - 1987, K.C. Ludema editor, ASME, Vol. 1, pp 333-47. 27. Wedeven, L.D., "Surface Deformation Considerations for Rolling with Incipient Sliding," Section 4.15 in Approaches to Modeling of Friction and Wear, F.F. Ling and C.H.T. Pan, Springer-Verlag, 1988, Proc. of the Workshop on the Use of Surface Deformation Models to Predict Tribology Behavior, Columbia Univ., Dec. 17-19, 1986, pp. 139-146. 28. Wedeven, L.D. and Harris, T.A., "Rolling Element Bearings Operating at the Extremes," Machine Design, August 1987, pp. 72-76. 29. Pallini, R.A. and Wedeven, L.D., "Traction Characteristics of Graphite Lubricants at High Temperatures," 42nd Annual ASLE Mtg., Anaheim, CA, May 11-14, 1987. 30. Wedeven, L.D., Pallini, R.A. and Hingley, C.G., "Systematic Testing of Ceramic Rolling Bearing Elements," Selection and Use of Wear Tests for Ceramics, ASTM SP1010, editors, C.S. Yust and R.G. Bayer, Sept. 1988, pp. 58-73. 31. Wedeven, L.D. and Miller, N.C., "Material and Tribological Considerations for HPOTP Bearings," Advanced Earth-to-Orbit Propulsion Technology - 1988, Vol. II, NASA CP-3012, 1988, pp. 728-57. 32. Wedeven, L.D, "Planning Tomorrow's Aircraft Bearing Tribology," Ball Bearing Journal, Vol. 234, September 1989, pp. 22-29. 33. Wedeven, Lavern D., "Tribology - Creating the Visions for the 1990's," Lubrication Engineering, Vol. 46, No.1, Jan. 1990, pp. 5-8. 34. Jahanmir, S., Eiss, N.S., Wedeven, L.D., Peterson, M.B., and Cheng, H.S., "Tribology and Mechanical Systems," Mechanical Engineering, Vol. 112, No. 3, March 1990, pp.64-67. 35. Wedeven, L.D. and Miller, N.C., "Evaluation of Materials and Surface Treatments for SSME HPOTP Bearings," Advanced Earth-to-Orbit Propulsion Technology, Vol. II, May 1990, pp. 524-554. 36. Wedeven, L.D., "Thin Film Lubrication and Tribological Simulation," Advances in Engineering Tribology, STLE, to be published; Symposium on Industrial Tribology, Northwestern University, Aug. 1990. 37. Wedeven, Lavern D.; Totten, George E. and Bishop Jr., Roland J., “Performance Map Characterization of Hydraulic Fluids”, International Off-Highway & Powerplant Congress & Exposition , Milwaukee, Wisconsin, September 12-14, 1994. 38. Wedeven, L.D.; Totten, G.E. and Bishop Jr., R.J., “Performance Map and Film Thickness Characterization of Hydraulic Fluids”, International Off-Highway & Powerplant Congress & Exposition, Milwaukee, Wisconsin, September 11-13, 1995. 39. Wedeven, L.D.; Totten, G.E. and Bishop Jr., R.J., “Testing Within the Continuum of Multiple Lubrication and Failure Mechanisms”, Tribology of Hydraulic Pump Testing, ASTM STP 1310, American Society for Testing and Materials, Philadelpha, 1995. 40. Wedeven, Lavern D.; Totten, George E. and Bishop Jr., Roland J., “Performance Map and Film Thickness Characterization fo Hydraulic Fluids”, Proceedings of the International Tribology Conference, Yokohama 1995. 41. Wedeven, Lavern D.; Totten, George E. and Bishop Jr., Roland J., “Hydraulic Fluid Lubrication: Perfomance Map and Film Thickness Characterization”, Hydraulic Fluids Symposium, International Fluid Power Exposition and Technical Conference, McCormick Place North, Chicago, Illinois, April 23-25, 1996. 42. Jones, W.R. Jr, Ajayi, O.O. and Wedeven. L.D., “Enhancement of perfluoropolyether Boundary Lubrication Performance”, STLE Lubrication Engineering, June 1997, pp 24-31. 43. Wedeven, L.D. and McGeehan, J.A. and Ryason, P.R., “Diesel Engine Oils Formulated with Hydrocracked and Solvent-Refined Basestocks Have Equal EHD Film Thickness”, STLE Tribology Trans, Vol. 40, No. 3, 1997, pp 453-460. 44. Wedeven, L.D., Totten, G.E and Bishop,Jr, R.J., “Tribological Modeling of Hydraulic Fluid Lubricity by Performance Map Film Thickness Evaluation”, New Achievements and Ideals in Fluid Power Engineering, Proceedings of the 4th International Conference on Fluid Power Transmission and Control (’97 ICPP), Editors Lu Yongxiang and Ge Yiyuan, International Academic Publishers, pp 58-66. 45. Wedeven, Lavern D.; Stimler, M. J., “WAM Technology for Tribo-Testing Hardware Simulation”, Industrial and Automotive Lubrication, 11th International Colloquium, January 15-17, 1998, pp.21-35. 46. Wedeven, Lavern D.; Bourdoulous, R., “Hydraulic Gear Pump Failure Analysis and Tribology Simulation”, Hydraulic Failure Analysis – Fluids, Components, and System Effects, ASTM STP1339, editors G. E. Totten, D. K. Wills and D. G. Feldmann, April 2001, pp. 105-133. 47. Wedeven, Lavern D.; Hille, E., “Tribology Testing for Load Carying Capacity of Aircraft Propulsion System Lubricating Oils”, Bench Testing of Industrial Fluid Lubrication and Wear Properties Used in Machinery Applications, ASTM STP1404, editors G. E. Totten, L. D. Wedeven, J. R. Dickey and M. Anderson, April 2001, pp. 318-332. 48. Brown, S. C.; Chin, H. A.; Haluck, D. A. and Wedeven, Lavern D., “Linking Lubricants, Materials, Design and Tribology”, Lubrication & Fluid Power, The Journal of Machinery Fluids, Tests and Standards, Vol. 2, Issue 4, November 2001. 49. Wedeven, Lavern, D.; King, T. E.; Linden, J. L; Caracciolo,
F.; McWatt, D. G.; “WAMhs Traction Machine and Test Methodology
for USCAR”, Lubricants, Materials and Lubrication Engineering,
13th International Colloquium Tribology, Vol. 3, January 15-17,
2002, pp. 1873-1887.
|
